Shop Connectors

Devices

Electrical Adaptors, Clamps and Converters

Network Connection Device Hire

Connection Device Hire

Insulated Rotary Clamp
Insulated G-Clamp
Fuse Holders

Busbar Connections

Hire electrical devices for quick, reliable busbar connections.

Protected Hire

Devices come in a heavy duty protector case for transportation.

Simple Operation

Devices are operated with a simple tool that is supplied.

Powersafe Quality

Devices come in a heavy duty protector case for transportation.
Get A Hire Quote >

Phase 3 Cable Hire

High Quality Electrical Clamps and Fuses.
G-Clamps, Fuse Holders, Rotary Clamps.

Hire at a Great Price – Return When You Want.

Get a quote

Rotary Clamp Hire

Electrical Busbar Clamp

Phase 3’s Powersafe Insulated Rotary ‘FRED’ Clamp allows power professionals to connect directly to a low voltage slotted type busbar. The fully insulated Rotary Clamp is tightened onto the busbar by the wheel using an insulated box spanner which meets the requirements of IEC 60900.

A Powersafe connector (can be source or drain) is incorporated into the clamp to allow direct connection to Phase 3’s powerlock cable. The Powersafe connectors on the Rotary Clamp are colour coded and mechanically keyed to distinguish between phases and prevent connection errors.

Fuse Holders

82mm and 92mm Fuse Holders

Powersafe Fuse Holder units allow a safe connection of a power generator’s supply cable to fully shrouded or non-shrouded low voltage feeders and cabinets. The unit consists of a fuse carrier and shroud with integral generator power connection point. Fuse Holders are available in 82mm and 92mm pitches (31/4” and 35/8”).
These electrical devices are rated at 500A and accepts standard BS88-5 fuses. In addition, dummy fuses that are used to isolate the incoming and outgoing circuits can be supplied. Fuse Holder units are direct replacements for the JW4ST and JW4ST82 fuse units.

Insulated G-Clamp Hire

Electrical G-Clamp

The Powersafe Insulated G-Clamp enables power professionals to connect directly to a low voltage busbar. The fully insulated clamp is tightened onto the busbar with an insulated box spanner which meets the requirements of IEC 60900. A Powersafe connector (can be source or drain) is incorporated into the clamp to allow direct connection to the generator power cable.

All Powersafe connectors on the G-Clamp are colour coded and mechanically keyed to distinguish between phases and prevent connection errors. The head of the G-Clamp is 45mm wide.

Lug to Source

Generator Tails

Lug to Drain

Generator Tails

Source to Drain

Powerlock Cable

Devices

Electrical Devices
Phase 3 Cable Hire
9 Coopers Lane, Coopers Point
Knowlsey Business Park
Liverpool, Merseyside
England, L33 7UB
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram